Cookie Img Back to top
   Call Me Free Offline
Home » Products » Industrial Process Weighing Controller

Industrial Process Weighing Controller

Industrial Process Weighing Controller
Industrial Process Weighing Controller
Product Code : ID511
Product Description

ID511 is a high accuracy Industrial Process Weighing Controller. This weighing controller has a variety of field bus communication with high reliability which can fully meet complicated and harsh requirements during industrial weighing control process.

 

Features of ID511 Industrial Weighing Controller:

* 5-step filter, high precision,high anti-vibration

* 3 housing modes: Panel、Harsh、Exd

* Harsh and Exd versions with seven bits 1” high green and red LED display and 10 status lights.

* Panel mount with seven bits 0.56” high green and red LED display and 10 status lights.

* Standard with two serial ports (RS232 and RS232/485), Kinds of field-bus options to connect to PLC or DCS

* Report Weight and rate at the same time from PROFIBUS-DP,MODBUS_RTU,

* 4-20mA, MODBUS-TCP

* 3 kinds PROFIBUS GSD inside

* UDP,TCP,MODBUS-TCP

* No-Testing Weight Calibration is available

* Zone:Zone 2, 22 and Div. 2 location

* Exd Class: EXD IIB T6

 

Specifications of ID511 Industrial Weighing Controller
Accuracy
Accuracy ClassIII
EU Approval150,000 Display Division ,CMC 6000e
Display & Keypad
Display7 bits 7-segment green or red LED display,

Exd and Harsh:1”high display(25.4mm)

Panel: 0.56” high display(14.2mm)

Update Speed50ms
Status DisplayTare,Net,Motion,Center of Zero,Kg/Lb,PLC online/offline
Key6 function keys(Memory,Tare, Clear,Zero,unit Switch,Print)

SS keypad for Exd version

Power On/OffNone
Keypad LockCan be locked via local input or remote communication

(MODBUS-RTU,MODBUS-TCP,PROFIBUS-DP, PROFINET, EtherNet/IP, CC-LINK)

ADC
Type24-bit
Speed200 Hz
Resolution0.06uV/d
Resolution Approved1uV/e(legal for trade)
Input0.1mV to 19Mv
Accuracy150,000d
Linearity and  Stability
In-linearity & TC ≤0.0015% FS;≤5ppm/℃
Load Cell
Exciting Voltage5V DC, max 150mA
Load Cell NumberMax 10 x 350Ω or 24 x 1100Ω
Connect Type 4- wired or 6-wired , Cable:274mR/m2
Scale Basic Functionality
Calibration2-point with testing weight or no testing(CalFree)
Filter5-step
Scale ProcessTare,Zero,Auto Zero,Motion, Auto Tare, Auto Clear,

Auto Print

InputsOption 8 Inputs,Can be assigned  remote inputs for

remote host(PLC or DCS)

OutputsOption 12 Outputs,Can be assigned  remote outputs for

remote host(PLC or DCS)

Target Control
OVER/UNDER/OKSupport and other 8 comparators are available
Zero ToleranceSupport
Target ControlSimple Setpoint or Sequence Control(with Start & Abort command)
Communication I/F
Serial Port2 ports:COM1-RS232, COM2-RS232/485,

MODBUST-RTU, Continuous output weight, Demand Input & Demand Output

PROFINETConnect to Siemens PLC, report integer weight data and Floating weight data
EtherNet/IPConnect to Rockwall PLC, report integer weight data and Floating weight data
MODBUS-RTUSupport, Integer & Floating weight data
100M LAN Port100M,TCP,UDP,MODBUS-TCP
Analog Output4-20mA(16-bit DAC) x1  or 4-20mA(16-bit DAC) x2
PROFIBUS-DPInteger & Floating weight data, 100Hz updating speed,

3 GSD inside,Totally compatible to PANTHER & IND131/331

CC-LINKfor Mitsubishi PLC, Totally compatible to PANTHER & IND131/331
Housing
Panel MountIP65,0.56” display
HarshIP69K, 1”display
ExdIP65, 1”display,Exd ib[ia II C Ga] IIB T6 Gb/DIP A21 TA,T6
DIN Rail
Power Supply86~264VAC
Working Condition
Temperature-10℃~40℃ ,95% RH
Power Supply86~264VAC,12W

ATRONTEC ELECTRONIC TECH CO.,LTD.